Unlocking the Secrets of Assessment Validation: Validating Assessments

Unlocking the Secrets of Assessment Validation: Validating Assessments

Blog Article

RTOs have numerous responsibilities post-registration, including annual declarations, AVETMISS reporting, and ensuring marketing compliance. Among these tasks, validation often stands out as particularly challenging.

While we've discussed validation in multiple articles, let's return to the basics. ASQA defines validation as a quality check of the assessment process.

Simply put, validation confirms which aspects of an RTO's assessment process are right and identifies where improvements are needed. A clear understanding of its main components makes it less intimidating.

The 2015 SRTOs Clause 1.8 requires RTOs to make sure their assessment systems, including RPL, are compliant with training package requirements and conducted per the Principles of Assessment and Rules of Evidence.

As per the standards, two kinds of validation are required.

The initial validation type checks that your RTO's assessments align with the training package requirements.

The following validation type ensures that assessments follow the principles of assessment and rules of evidence.

It suggests that validation takes place before and after the assessment. This article focuses on the first type—assessment tool validation.

The Basics of the Two Types of Assessment Validation

Clarifying Assessment Validation

As mentioned earlier and in one of our previous blog posts, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, known as pre-assessment validation, pertains to the first part of the clause, focusing on meeting all unit requirements and ensuring total workbook compliance.

In post-assessment validation, the emphasis is on implementation, ensuring that Registered Training Organisations conduct assessments as per the Principles of Assessment and Rules of Evidence.

For this piece, our emphasis will be on assessment tool validation.

Steps to Perform Assessment Tool Validation

With a grasp of the two validation types, let’s focus on assessment tool validation.

When is Assessment Tool Validation Conducted?

The goal of assessment tool validation is to make sure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.

No need to wait for the next validation schedule in your 5-year cycle. Validate new resources immediately to ensure they’re suitable for students.

Nevertheless, this isn't the only occasion for this type of validation. Conduct assessment tool validation when you:

- resources get updated
- new training products get added on scope
- your course includes training product updates
- learning resources are identified as a risk during your risk assessment

The Australian Skills Quality Authority's risk-based approach to regulation means RTOs must conduct regular risk assessments. Complaints from students about learning resources signal the need for assessment tool validation.

Selecting Training Products for Validation

It's important to remember this validation ensures that all learning resources are compliant before use. All RTOs need to validate resources for each unit.

Starting Assessment Tool Validation: What You Need

Instructional Resources

For validating your assessment tools, you will need the full array of your learning resources:

Mapping tool – the first document to check. It indicates which assessment items align with unit requirements, making validation faster.

Learner/student workbook – ensure it's appropriate for use as an assessment tool. Check if instructions are clear and answer fields are sufficient. This is a frequent gap.

Assessor guide/marking guide – check that there are sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.

Other related resources – these could be checklists, registers, and templates created separately from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.

Panel for Validation

Clause 1.11 defines the requirements for validation panel members, stating validation can involve one or more individuals. RTOs usually require all trainers and assessors to be present, sometimes including industry experts.

As a group, your validation panel must possess:

Vocational competencies and current industry skills applicable to the unit being validated

Current expertise and skills in vocational teaching and learning

Any one of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or its replacement

Assessment validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool is beneficial for both the validation process and documentation. It makes it easier to understand how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
At the same time, it acts as documentation that you have validated your resources before allowing student use.

ASQA does not specify a required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools as a whole to ensure they meet the principles of assessment.

Principles of Assessment Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.

It is highly recommended to use a more detailed template for inspecting each unit requirement and the assessment items that map to them. Below is an example:

Element Performance Criteria Assessment Instructions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What to Check?

As stated in our blog post Common Problems In Assessment Tools, you must ensure your assessment tools allow trainers to adhere to assessment principles and evidence rules.

Assessment Basic Principles
Fairness – Does the assessment ensure equal opportunity and access for everyone?

Flexibility click here – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Is the assessment assessing what it is intended to assess? Is it a valid tool for evaluating the required skill or knowledge?

Reliability – Will the assessment yield the same results every time, no matter who conducts the training? Will different assessors make the same decision on skill competence?

Basic Rules of Evidence

Validity – Does the evidence demonstrate that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to confirm the learner has the required skills and knowledge?

Authenticity – Does the assessment tool prove that the work is the candidate’s own?

Currency – Are the assessment tools updated to reflect current units of competency and industry practices?

Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.

To avoid using learning resources that leave certain unit requirements unaddressed, ensure you adhere to these guidelines:

Show What You Mean

Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Perform each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

change diapers

bottle preparation, feeding babies from bottles, and cleaning equipment

prepare solids and feed babies

respond to baby signs and cues suitably

prepare infants for sleep and soothe them

monitor and support age-appropriate physical exploration and gross motor skills

Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Pay Attention to Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet the requirement.

Full or Not Competent

Pay attention to lists. Again, as illustrated above, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail

Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What information can be included in a work package?

Possible answers may include:

Needed materials

Applicable costs

Time required for activities

Allocated duties and responsibilities

If an assessment item calls for several answers, specify the number of answers needed from a student. This ensures your assessment is reliable, and the evidence gathered is valid.

This is true for assessment items with double-barrelled questions or questions requiring more than one answer at the same time. These can confuse students and assessors, as shown in the sample question below:

Name a hazard and/or environmental issue in the workplace and choose the most effective hazard control hierarchy.

Answers might include, but are not limited to:

Weather conditions – isolating the work area, engineering, personal protective equipment

Work area and ground conditions – eliminating hazards, isolating, engineering

People – isolation, engineering controls, administrative controls

Structural hazards – substituting, isolation, engineering controls

Chemical hazards – isolation, use of engineering controls, administration

Equipment or machinery – isolating, engineering controls, administration

Steering clear of double-barrelled questions makes it simpler for students to respond and for assessors to judge competence accurately.

Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” However, such guarantees require you to wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant approach.